Upgrade your restrictive and failure-prone factory intercooler pipe with the Mishimoto Lancer Evolution X Upper Intercooler Pipe Kit, precision engineered for the Mitsubishi Evolution X.This kit features polished 2.5 mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure.This kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power.The Mishimoto Lancer Evolution X Upper Intercooler Pipe Kit will provide reliable charge-air connections as well as improved throttle response, perfect for your daily driver or rallycross Evo.This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty.

Unleash your 2021+ 2.7L EcoBoost Ford Bronco’s full potential with the Mishimoto High-Mount Intercooler Kit! Designed to allow your Bronco to breathe the coldest, densest air possible, this high-mount intercooler kit is comprised of our high-mount intercooler and performance intercooler pipe kit.----We’ve relocated the intercooler to the upper grille to allow better airflow at all times, even with winches, light bars, or larger bumpers installed. This location also helps protect the intercooler from obstacles on the trail. Our intercooler utilizes a 3.1 inch-thick bar-and-plate core that’s precision TIG welded to cast aluminum end tanks for superior durability and heat soak resistance. The weak plastic stock piping is replaced with high-flowing, durable cast and mandrel-bent aluminum piping and silicone boots with DuraCore technology. The larger volume of our pipes allows your 2.7L EcoBoost to breathe freely and make the most of its turbos, while the all-aluminum construction and DuraCore boots provide unmatched durability.----Durability is always a good thing, but it’s even better when it’s paired with performance. The high-mount intercooler boasts a 49-percent greater core volume and 93-percent greater external fin surface area than stock, which results in 21-degree cooler outlet temps over the stock intercooler. When combined with the intercooler pipes' 34-percent reduction in restriction, this kit produces power gains of 11.6 HP and 13.7 lb-ft. of torque on the stock tune.----This intercooler kit is available with a stealth black or sleek silver intercooler and micro-wrinkle black powder coated pipes. Functionality of adaptive cruise control is retained utilizing a relocation bracket and 360-degrees cameras are unaffected. As with all our products, the Mishimoto 2021+ Ford Bronco 2.7L High-Mount Intercooler kit is backed by our signature Mishimoto Lifetime Warranty and comes with all necessary hardware for easy installation.

Unleash your 2021+ 2.3L EcoBoost Ford Bronco’s full potential with the Mishimoto High-Mount Intercooler Kit! Designed to allow your Bronco to breathe the coldest, densest air possible, this high-mount intercooler kit is comprised of our high-mount intercooler and performance intercooler pipe kit.----We’ve relocated the intercooler to the upper grille to allow better airflow at all times, even with winches, light bars, or larger bumpers installed. This location also helps protect the intercooler from obstacles on the trail. Our intercooler utilizes a 3.1 inch-thick bar-and-plate core that’s precision TIG welded to cast aluminum end tanks for superior durability and heat soak resistance. The weak plastic stock piping is replaced with high-flowing, durable aluminum piping and silicone boots with DuraCore technology. The larger volume of our pipes allows your 2.3L EcoBoost to breathe freely and make the most of its turbo, while the all-aluminum construction and DuraCore boots provide unmatched durability.----Durability is always a good thing, but it’s even better when it’s paired with performance. The high-mount intercooler boasts a 49-percent greater core volume and 93-percent greater external fin surface area than stock, which results in 21-degree cooler outlet temps over the stock intercooler. We also saw exceptional improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20-degrees cooler than stock.----This intercooler kit is available with a stealth black or sleek silver intercooler and micro-wrinkle black powder coated or polished pipes to match any style. Functionality of adaptive cruise control is retained utilizing a relocation bracket and 360-degrees cameras are unaffected. As with all our products, the Mishimoto 2021+ Ford Bronco 2.3L High-Mount Intercooler kit is backed by our signature Mishimoto Lifetime Warranty and comes with all necessary hardware for easy installation.

Mishimoto has developed a direct-fit 2017-2021 3.5L F-150 EcoBoost Intercooler Pipe kit that allows owners to maximize the performance potential of their F-150 or second-gen Raptor. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore? technology. The larger volume of our pipes allows your 2017-2021 3.5L F-150 EcoBoost to breathe freely and make the most of the its two turbochargers. DuraCore? boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every F-150 EcoBoost or second-gen Raptor from the show to the track. Combine this kit with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 3.5L EcoBoost engine is capable of. As with all Mishimoto products, this 2017-2021 3.5L F-150 EcoBoost Intercooler Pipe kit is backed by our Lifetime Warranty.

The Mishimoto 2011?2014 F?150 EcoBoost Hot?Side Intercooler Pipe Kit is an ideal upgrade in reliability and performance. The Mishimoto kit features polished aluminum or wrinkle black piping accompanied by silicone couplers with DuraCore? technology. Engineered to eliminate restrictive bends, this hot?side pipe kit increases average airflow by 10-percent and internal volume by 41-percent when compared to stock. The DuraCore? couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our couplers by preventing leaks and blowouts. To add even more reliability, Mishimoto's Constant Tension T?bolt clamps are included for an accurate and secure installation. Pairing this kit with our Mishimoto 2011?2014 F?150 EcoBoost Cold?Side Intercooler Pipe kit gives your truck the efficient, unimpeded airflow it needs to make up to 15 more horsepower and 21 ft/lbs more torque. To further improve your charge?air system, combine this pipe kit with the Mishimoto 2011?2014 F?150 EcoBoost performance intercooler. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler pipe kit again.

Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics? Mishimoto has you covered with their new charge pipe designed specifically for the 2015-2021 Subaru WRX. Utilizing a one-piece construction with a cast aluminum pipe outlet, this charge pipe provides a smooth transition in size from the turbocharger compressor outlet to the intercooler end tank. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. The kit also includes a new charge pipe to intercooler hose, and new bypass valve hoses. These components negate the need to gather supplies for installation, and their high quality construction ensures years of reliable service. This innovative charge pipe is available in either polished or wrinkle black finish and includes the Mishimoto Lifetime Warranty

Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.

Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.

The N55 is a powerhouse, capable of producing over 600 horsepower on stock internals, but it has weak points. All that power requires almost 3x the boost the N55 was designed for. While the engine can handle it, your charge pipes may not be so strong. After over a decade, your BMW’s stock charge pipes have become brittle and prone to catastrophic failure. Every time you press the throttle and hear that turbocharger spool is an invitation to the broken BMW club. Luckily, Mishimoto has a solution with our BMW N55 Performance Aluminum Charge Pipe Kit..----The Mishimoto charge pipe kit for your 2011-2018 N55-powered BMW adds durability to your charge air system, whether it’s a stock daily driver or a 600 horsepower tuned monster. This aluminum charge pipe kit replaces your stock plastic pipes with durable, mandrel-bent pipes, long-lasting silicone couplers, and CNC-machined aluminum quick-disconnects. Our quick-disconnect flanges are CNC-machined to be perfectly round and far stronger than stock plastic parts, preventing boost leaks and unexpected failure. Replacing both the throttle body pipe and the intercooler pipe creates a reliable system, with no plastic parts to become the weakest link. To add even more reliability, we’ve joined our two pipes with a durable silicone coupler that easily withstands increased boost pressures.----Perfect fitment is a priority at Mishimoto, so we include all bracketry needed to keep your intercooler pipe where it belongs. Finally, a job worth doing is worth doing right, so we’ve included new charge pipe O-rings and quick-disconnect clips to save you time and a trip to buy more parts. Like all our BMW performance parts, this 2011-2018 BMW N55 charge pipe kit is backed by our Mishimoto Lifetime Warranty. So, if pressing the throttle of your N55-powered BMW leaves you with more anxiety than joy, install the Mishimoto N55 performance aluminum charge pipe kit to bring the joy back to your ultimate driving machine.

Maximize the performance and efficiency of your 1999.5 through 2003 Ford 7.3L PowerStroke V-8 by replacing the stock, restrictive piping that connects the intercooler to your engine with the 7.3L Powerstroke charge pipe kit. This upgraded 3" cold side charge pipe is larger in diameter than the stock pipe, and it has smooth mandrel bends to increase airflow velocity for improved power and lower EGTs. The 7.3L Powerstroke charge pipe kit is also more durable than the OEM pipe being made from Stainless Steel and connected with Sinister Diesel's 4-ply silicone boots that are rated up to 400 psi. The intercooler pipes are masterfully TIG welded and finished in polished powder-coated Sinister Blue for extra protection and a clean and stylish appearance. Four stainless steel spring boot clamps are also included with this kit to provide a long-lasting, reliable seal. Features and Benefits:Stainless Steel Construction. CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Powder Coated and Polished in Sinister BlueKit Includes:(1) Cold Side Charge Pipe, (1) Hot Side Charge Pipe, (6) Silicone Boots, (12) Stainless Steel Spring Clamps.

Maximize the performance and efficiency of your 2017 through 2021 Ford 6.7L PowerStroke V-8 by replacing the stock, restrictive piping that connects the intercooler to your engine with the 2017-2021 Powerstroke 6.7L cold side charge pipe. This upgraded 3" cold side charge pipe is larger in diameter than the stock pipe, and it has smooth mandrel bends to increase air flow velocity for improved power and lower EGTs. The 2017-2021 Powerstroke 6.7L cold side charge pipe is also more durable than the OEM pipe being made from 6061 Aluminum alloy, and it is connected with Sinister Diesel's 4-ply silicone boot that is rated up to 400 psi. The intercooler pipes are masterfully TIG welded and finished in polished powder coated Sinister Blue for extra protection and a clean and stylish appearance. A pair of stainless steel spring boot clamps are also included with this kit to provide a long-lasting, reliable seal. Don't let a factory pipe rob your engine of power and efficiency; get the Sinister Diesel 2017-20 Powerstroke 6.7L cold side charge pipe!, Features:6061 Aluminum Alloy Construction. CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Higher Flow and Lower Turbulence Airflow for Increased PowerIncludes:(1) Hot Side Charge Pipe, (1) Silicone Boots, (2) Stainless Steel Spring Clamps

The Sinister Diesel Charge Pipe Kit for the Powerstroke 6.4L includes the intercooler pipe that connects the intercooler to the intake, and the pipe that connects the turbocharger compressor to the intercooler. This upgraded pipe is larger in diameter and has smooth mandrel bends to increase air flow velocity to improve power and lower EGTs. The Sinister Diesel Charge Pipe Kit is also more durable, being made from 6061 Aluminum alloy and connected with Sinister Diesel's 4-ply silicone boots that are rated up to 400psi. Our Intercooler Pipes are masterfully TIG welded and finished in polished powdercoated Sinister Blue for a beautiful under-hood look. Features and Benefits:6061 Aluminum Alloy Construction. CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Powder Coated and Polished in Sinister BlueKit Includes:(1) Cold Side Charge Pipe, (2) Hot Side Charge Pipes, (5) Silicone Boots, (10) Stainless Steel Spring Clamps

Sinister Diesel Intercooler Charge Pipes for Ford TrucksThe Sinister Diesel Charge Pipe Kit for the Powerstroke 6.0L includes the intercooler pipe that connects the intercooler to the intake, and the pipe that connects the turbocharger compressor to the intercooler. This upgraded pipe is larger in diameter and has smooth mandrel bends to increase air flow velocity to improve power and lower EGTs. The Sinister Diesel Charge Pipe Kit is also more durable, being made from 6061 Aluminum alloy and connected with Sinister Diesel's 4-ply silicone boots that are rated up to 400psi. Our Intercooler Pipes are masterfully TIG welded and finished in polished powdercoated Sinister Blue for a beautiful under-hood look. Note: The Hot-side charge pipe does NOT fit with trucks that have the dual alternator option. Features and Benefits:6061 Aluminum Alloy Construction. CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Powder Coated and Polished in Sinister BlueKit Includes:(1) Cold Side Charge Pipe, (1) Hot Side Charge Pipe, (4) Silicone Boots, (8) Stainless Steel Spring Clamps.

Ford 6.0 Intercooler pipes CARB EO#D-721-5, Ford 6.0 Intake elbow CARB EO# D-721-6 (CARB EO is for 2005-2007 models only), The Sinister Diesel Charge Pipe Kit with the Intake Elbow for the Powerstroke 6.0 includes the intercooler pipe that connects the intercooler to the intake, the pipe that connects the turbocharger compressor to the intercooler, and the intake elbow. This upgraded pipe is larger in diameter and has smooth mandrel bends to increase air flow velocity to improve power and lower EGTs. The Sinister Diesel Charge Pipe Kit is also more durable, being made from 6061 Aluminum alloy and connected with Sinister Diesel's 4-ply silicone boots that are rated up to 400psi. Our Intercooler Pipes are masterfully back-purge TIG welded and finished in polished powdercoated Sinister Blue for a beautiful under-hood look. Note: The Hot-side charge pipe does NOT fit with trucks that have the dual alternator option. Features and Benefits:6061 Aluminum Alloy Construction, CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Powder Coated and Polished in Sinister BlueKit Includes:(1) Intake Elbow, (1) Cold Side Charge Pipe, (1) Hot Side Charge Pipe, (4) Silicone Boots, (8) Stainless Steel Spring Clamps.

Sinister Diesel Intercooler Charge Pipes for Ford Trucks, The Sinister Diesel Hot Side Intercooler Charge Pipe for the Powerstroke 6.0L replaces the stock, restrictive piping that connects the turbocharger to your intercooler. This upgraded pipe is larger in diameter and has smooth mandrel bends to increase air flow velocity to improve power and lower EGTs. The Sinister Diesel Hot Side Charge Pipe is also more durable, being made from 6061 Aluminum alloy and connected with Sinister Diesel's 4-ply silicone boots that are rated up to 400psi. Our Intercooler Pipes are masterfully back-purge TIG welded and finished in polished powdercoated Sinister Blue for a beautiful under-hood look. Note: The Hot-side charge pipe does NOT fit with trucks that have the dual alternator option. Features and Benefits:6061 Aluminum Alloy Construction, CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Powder Coated and Polished in Sinister BlueKit Includes:(1) Hot Side Charge Pipe, (2) Silicone Boots, (4) Stainless Steel Spring Clamps

Sinister Diesel Intercooler Charge Pipes for Ford TrucksThe Sinister Diesel Cold Side Charge Pipe Kit for the Powerstroke 6.0L connects the intercooler to the intake. This upgraded pipe is larger in diameter and has smooth mandrel bends to increase air flow velocity to improve power and lower EGTs. The Sinister Diesel Cold Side Charge Pipe Kit is also more durable, being made from 6061 Aluminum alloy and connected with Sinister Diesel's 4-ply silicone boots that are rated up to 400psi. Our Intercooler Pipes are masterfully TIG welded and powdercoated Sinister Blue for a beautiful under-hood look.Features and Benefits:6061 Aluminum Alloy Construction. CNC Mandrel Precision Bent 3" Tubing for a Perfect Fit, 4-Ply Silicone Boots that are rated to 400psi, Stainless Steel Spring Boot Clamps for a Reliable Seal, Powder Coated and Polished in Sinister BlueKit Includes:(1) Cold Side Charge Pipe, (2) Silicone Boots, (4) Stainless Steel Spring Clamps

The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance intercooler charge pipe system to develop some serious bolt-on power. The soul of this charge pipe system is with our mandrel-bent, over-sized 2.75" 6061-T6 aluminum tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Being a twin turbo setup, the Y-Pipe was of critical concern and to get the flow balanced just right and for repeatability, our engineers designed a cast Y-piece for harmonized flow and ultimate power. The engineering team also developed precision CNC machined adapter flanges that mimic the OE-Style connections for a simple install.

The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance intercooler charge pipe system to develop some serious bolt-on power. The soul of this charge pipe system is with our mandrel-bent, over-sized 2.75" 6061-T6 aluminum tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Being a twin turbo setup, the Y-Pipe was of critical concern and to get the flow balanced just right and for repeatability, our engineers designed a cast Y-piece for harmonized flow and ultimate power. The engineering team also developed precision CNC machined adapter flanges that mimic the OE-Style connections for a simple install.

Perrin 08+ WRX FMIC Red Boost Tubes w/ Black Silicone

Perrin 08+ STi FMIC Red Boost Tubes w/ Black Silicone